Yep, the sewing cabinet arrived yesterday. No drums or Main Street parades, but locked up dogs and both front doors open. This is a floor model of a cabinet made by Koala Studios, and the quality is superb. Even better, it’s domestic, and that makes me quite happy.
Warning! Lots of external links to Flickr (where you can enlarge any image) and watch a video I made of the machine support going up and down.
Tim, from Kingdom Sewing, along with his kids and a friend, delivered it. The whole process went smoothly and quickly. Tim explained this and that, as well as showed how things work. Let us begin!
The cabinet against its blank wall. I have to fill up that space! It stands between the door to the hallway and the bathroom in the master bedroom. It matches the oak trim and base board (removed and not yet replaced, sigh), but doesn’t work with the floor. My opinion.
If you enlarge the photo above by going to Flickr (click on picture), you will see the plug that covers the machine lift that lowers and hides the machine into the cabinet. The cabinet itself measures 53-54 inches wide, 26 inches deep, 33 inches high. An extension table in the back doubles the depth of the table to 52 inches.
In the US, 29.5 inches is a pretty standard height for work surfaces, so I am actually a bit higher up than at the dining table, where I currently do all my sewing.
The cabinet rolls about extraordinarily easily and smoothly with very high quality casters that can be locked into place. It moves far more easily than my smaller white sewing cabinet. Wow! is all I can say to that.
Another image of the cabinet closed, with my floor lamp I use. It will be on the left side when I sew. If you click on this image (and any) you will go to my Flickr page. Admire the paint can we use as a door stop . . . and I need to get something on that wall above the cabinet. Ikea pegboards? A painting? Shelves? Walruses and peanut butter?
Here, the machine plug has been removed, a rubber cushioning mat (to cut down on vibration and to protect the surface from any ickiness under the machine), and a machine placed on top.
Here the cabinet is opened. My flashlight is on top. The doors are opened and folded to accommodate the shelves that can be mounted on top of them. Each shelf has pegs that you attach to the bottom of the shelf. These shelf pegs then can be inserted into holes on the tops of the folding doors and locked into place. The doors can be moved around or locked into place by locking the wheels.
This is the left side of the cabinet. The shelf is smooth. It can be used to support a serger, swung in to support fabric at the far left of the cabinet, or swung in closer to support long, as opposed to wide, bits of fabric, when the extension is fully to the left.
There are three drawers on the left of the machine, and because of the taller height of the cabinet, there is also a shelf cubby for a shallow storage container. To the right of the bottom drawer you can see a shelf. This is a foot rest. It comes with different footings so I can make it higher if I want – this is great for either tall people (shorter footings) or short people (taller footings). I haven’t figured out what I need yet – I have to see if I want to buy another chair or just use the one in the studio at the drafting table.
The right side of the sewing cabinet is wide open, with the doors swung as far back as they can go. The notion tray is on the top. In the back left, you will see some black – these are holes into which I can place scissors to hang down. The other indentations can hold things that might roll around, such as spools of thread or a bobbin.
Again, you can see the foot rest on the bottom part of the cabinet, and the cubby at the top of the drawers. On the left side of the open space (knee space) is the left side of the motorized machine lift, which is currently up. The indentation on the top of the cabinet shows you this.
This is the notion tray. The two black rings are for scissors. If you look closely at the lower left, you will see the power switch, “on” with the blue light apparent, that allows you to raise or lower the machine support as you desire.
Here is the power switch, turned on. As you can see, there is also a “remote control” for the machine lift! I can have it on or off.
Remote control! Notice the different shape of the up and down buttons? How clever is that? I did a phone video of the lift going up and down with a machine on it. I filmed it with my cell phone and triggered it with the remote control. When I try to put it into this post, there are weird gaps above and below it, so click on this link to see it if you want: https://flic.kr/p/2kNLDU8
The extension is supported by two flanges which roll out. The one on the left is snug against the undersurface of the extension, but the one on the right needs some help. It flops around a bit. That is a problem to be solved in the not too distant future . . . As you can see, there are also holes for electrical cords, one at the top for lamps, and one at the bottom for the machine lift on the motor. I am still working that out how I want to set it up.
Here you can see how smoothly the extension sits next to the table itself. This prevents snagging of fabric as you sew.
I’ve rolled the cabinet out and lifted up the extension, holding it in place with two supporting panels which swing out. The machine is totally raised up and resting on a rubber mat which will prevent damage to the surface of the machine support.
Smudge is here to supervise. She likes a photo op whenever possible. (Or is it a photo bomb?)
Sewing machine in place, notions tray in place.
Nice hardware, baby!
Ready to sew! Good light, adjustable chair, table extension, notions tray.
And there you have it! It will take a bit to work out how to do things and figure out what will work to my liking and my needs.
The extension table will be useful to support large items I am sewing. An issue with it is that one of the extensions appears to be a little short. Lopsided floor? I will have to move the cabinet around a bit to determine the situation, have Josh look at it, and / or call Tim.
I will want to put a mat under the chair to keep from wearing out the flooring when I roll around. The chair is adjustable in height, but may be a bit too wide and too deep for proper support when sewing for a long time. Lumbar support means a less deep chair if it is going to work. The foot rest inside the cabinet may need to be raised with the longer footings. I prefer to have my knees up and bent a bit, not dangling or having my toes lower than my heels. The chair itself is nice as it has a foot rest on it, but may not be the best when sewing. Again, that will need to be worked out.
The notion and side trays must be locked in on top of the folding doors. If not, they will topple off and break or otherwise get damaged. I managed to do it by myself, but that screwdriver needs to be close at hand!
Altogether, I think this is going to be a great bit of furniture to use while sewing. There is a lot it has to offer and adapts to situations and needs.
Ink, Yarn & Beer 