Edge of the old year, edge of the new year. A point where something morphs into something else. A precipice.
Let 2025 begin!
Edge of the old year, edge of the new year. A point where something morphs into something else. A precipice.
Let 2025 begin!
Yesterday I went out with two film cameras – the Canonet QL17 G-III rangefinder, and a new-to-me Nikon FM2N. The former I have used in the past, and know it is in overall good condition. The Nikon, though, came from eBay, and is a well-used camera. There is dust in the prism and mirror set up, but I didn’t know if there were any light leaks, so I needed to test it out before anything else. As a note, none of these pictures have any post-processing; they are as they came from the local pharmacy.
QL17
My past complaints with this little camera was my inability to really “get” the focusing. This time around, it was better. As with anything, practice helps. These pictures were for practice on focusing, and getting a feel of the exposures. The needle for the exposures no longer works except when the camera is on “A” – thus, out comes the light meter. The light meter did a great job. Subject content aside, here are some results of my practicing with this camera, indoors and out.
This had a Kodak film in it – and I forget which one! I do know that it has been in the camera for a few years. I like the colors. I also see I will need a polarizing filter on it to do justice to the skies, or else use an ND filter for brighter situations.
This little camera has a permanent lens, a 40mm 1.7 that has a good reputation. In general, I am pleased with the camera; now I have to work with it in different situations.
Nikon FM2N
This camera is a small one, and well-rated in general terms of build and quality. I got it because I can attach any of my Nikon F-mount lenses to it – a definite plus considering my digital camera is a Nikon! The ones which will not work on it are any of the G lenses, as they interface with digital cameras to focus – there are no focusing rings to use, as there are on the D lenses or earlier. It can take AI, and AIS, but not the non-AI lenses. I used a 28mm close-focusing Vivitar lens. Here are the examples I took, using film from the local drug store, Fuji Superia Xtra 400.
The Fuji film is a bit more punchy, perhaps, than the Kodak. Obviously, no light leaks. The metering system in the camera works, using +, 0, -, and a combinations thereof. It was nice to be able to use a different lens, and do some close-up work as permitted by the lens.
Conclusion
I like both cameras. I am indifferent about the quality of the pictures, and this makes me wonder about the quality of the films, but this might have no bearing on anything. I plan to head out to a place I photograph a lot, just to see what I can put together.
Another issue is the processing. Since my needs were pretty simple – light leak? no light leak? – my demands were not high. However, I am not too pleased with the size of the jpgs I got back from the local fast photo – few over 1 meg. Way too small to edit. However, now I can play with some of my resizing software to see what the results might be, and perhaps I won’t be too disappointed.

Unretouched JPG from 2010. Shot with film using my Canon AE1 and a Tamron Adaptall 80-210 lens. Processed at the local Target.

I am giving film a try. Again.

A few years ago I thought I would give film photography with a rangefinder camera a shot. It was a complete failure. The reason is I am not too sure about using this camera, much less if it really works for me. I may be better off with a regular film camera, one which uses the lens itself to focus. Consequently, I bought a used Nikon FM2n on eBay – it should arrive in a few days. However, I do intend to master this rangefinder.
This Canonet is a really cool little camera, but focusing it just drives me crazy. I can use a split-screen focusing ring very easily, but this one is different. There are little squares in the viewfinder that sorta need to line up. On top of that, if you don’t get your fingers out of the way, you might end up with one in the picture that you never saw while making your exposure.
Well, I printed out the manual and will re-read it. Then I will practice focusing it. Finally, I will load up some film and see what happens. I have some Kodak Professional Portra 400 to putz with.